2006 Volvo S60: Shifter Cable Removal at Shifter

Tools and Materials

• 10mm wrench
• 13mm wrench
• Phillips head screwdriver
• Flathead screwdriver

Time Required

Approximately 30 minutes

Difficulty Level

Moderate

Step-by-Step Instructions

1. Park the vehicle in Park and engage the parking brake.
2. Locate the shifter cable bracket below the shifter assembly.
3. Use a 13mm wrench to loosen the bolts securing the bracket.
4. Pull the bracket away from the shifter assembly.
5. Use a Phillips head screwdriver to remove the screws securing the shifter cable to the shifter lever.
6. Pull the shifter cable out of the shifter lever.
7. Use a 10mm wrench to loosen the bolts securing the cable to the transmission.
8. Pull the cable away from the transmission.

Tips and Tricks

• It may be helpful to use a pry bar to loosen the bracket from the shifter assembly.
• Be careful not to damage the shifter cable or the transmission when removing it.

Troubleshooting

• If the shifter cable is not moving freely, it may be damaged. Inspect the cable for any signs of damage and replace it if necessary.
• If the shifter cable is not engaging the transmission, the transmission may need to be serviced.

FAQs

Q: Can I remove the shifter cable without removing the shifter assembly?
A: Yes, but it is more difficult. You will need to use a pry bar to loosen the bracket from the shifter assembly.

Q: How can I tell if my shifter cable is damaged?
A: Inspect the cable for any signs of damage, such as cuts, fraying, or kinks. If the cable is damaged, it will need to be replaced.

Q: How much does it cost to replace a shifter cable?
A: The cost of replacing a shifter cable varies depending on the make and model of your vehicle. However, you can expect to pay between $100 and $300 for the part and labor.

Q: Can I replace the shifter cable myself?
A: Yes, but it is a moderately difficult repair. If you are not comfortable working on your vehicle, it is best to take it to a mechanic.