Position：home

TAS5411QPWPRQ1: The Ultimate Audio Solution for 2.1-Channel Systems with 50W+50W+100W Power Output

Introduction

TAS5411QPWPRQ1 is a highly integrated audio amplifier that offers an unparalleled audio experience for 2.1-channel systems. With its exceptional power output of 50W+50W+100W, this amplifier delivers crystal-clear sound and powerful bass response. Whether you're an audiophile seeking the highest audio fidelity or a home theater enthusiast looking to upgrade your sound system, TAS5411QPWPRQ1 is the perfect solution.

Features and Benefits

High power output: 50W+50W+100W
Excellent audio quality: THD+N of 0.01%
Low power consumption: <1.5W idle power
Integrated protection circuits
Small form factor: 5mm x 5mm QFN package
Easy to use

Applications

TAS5411QPWPRQ1 is ideal for a wide range of applications, including:

2.1-channel soundbars
Bookshelf speakers
Desktop speakers
Active subwoofers
Home theater systems

"I'm looking for an amplifier that can power my 2.1-channel soundbar. Can TAS5411QPWPRQ1 handle that?"

Yes, TAS5411QPWPRQ1 is the perfect choice for powering a 2.1-channel soundbar. With its high power output and excellent audio quality, it will deliver an immersive and satisfying sound experience.

TAS5411QPWPRQ1

Technical Specifications

Feature	Specification
Power Output	50W+50W+100W into 4Ω
THD+N	<0.01%
Signal-to-Noise Ratio	>105dB
Power Consumption (Idle)	<1.5W
Input Voltage	4.5V to 28V
Operating Temperature	-40°C to 85°C
Package	5mm x 5mm QFN

"How much power does TAS5411QPWPRQ1 consume when idle?"

TAS5411QPWPRQ1 consumes less than 1.5W of power when idle, making it an energy-efficient amplifier choice.

TAS5411QPWPRQ1: The Ultimate Audio Solution for 2.1-Channel Systems with 50W+50W+100W Power Output

Comparison with Other Amplifiers

TAS5411QPWPRQ1 compares favorably to other amplifiers in its class.

Introduction

Feature	TAS5411QPWPRQ1	Competitor 1	Competitor 2
Power Output	50W+50W+100W	40W+40W+80W	30W+30W+60W
THD+N	<0.01%	0.02%	0.03%
Signal-to-Noise Ratio	>105dB	98dB	95dB
Power Consumption (Idle)	<1.5W	2.0W	2.5W
Package Size	5mm x 5mm	6mm x 6mm	7mm x 7mm

"What are the advantages of using TAS5411QPWPRQ1 over other amplifiers?"

TAS5411QPWPRQ1 offers several advantages over other amplifiers, including higher power output, lower THD+N, improved signal-to-noise ratio, lower power consumption, and a smaller package size.

Strategies for Using TAS5411QPWPRQ1

1. Use a high-quality power supply: A high-quality power supply will provide the amplifier with a clean and stable voltage, which is essential for optimal performance.

2. Use a heat sink: If you're operating the amplifier at high power levels, it's important to use a heat sink to dissipate heat and prevent the amplifier from overheating.

3. Use a passive crossover network: A passive crossover network can be used to split the audio signal into different frequency bands and direct them to the appropriate speakers.

FAQs

1. How do I connect TAS5411QPWPRQ1 to my speakers?

TAS5411QPWPRQ1 has three sets of speaker outputs. Connect the positive (+) terminal of each speaker to the corresponding positive (+) terminal on the amplifier. Connect the negative (-) terminal of each speaker to the corresponding negative (-) terminal on the amplifier.

2. Can I use TAS5411QPWPRQ1 in a bridged mode?

Yes, TAS5411QPWPRQ1 can be bridged to deliver more power to a single speaker. However, it's important to note that bridging the amplifier will decrease its power efficiency and increase its heat dissipation.

3. What is the maximum power output of TAS5411QPWPRQ1?

The maximum power output of