IRAMX20UP60A-2: A Comprehensive Guide to Installation, Operation, and Maintenance

Introduction

The IRAMX20UP60A-2 is a high-performance, low-noise, 20-watt IRAMX® amplifier designed for use in a wide range of industrial and military applications. This amplifier provides high-quality audio performance with a wide range of features and options, including:

• 20 watts of continuous power output
• Low noise figure (< 2 dB)
• Wide bandwidth (10 MHz to 1 GHz)
• High gain (30 dB)
• Optional built-in limiting
• Optional power supply

The IRAMX20UP60A-2 is ideal for a variety of applications, including:

• Communication systems
• Test and measurement equipment
• Medical imaging systems
• Military and aerospace applications

Installation

The IRAMX20UP60A-2 is a surface-mount amplifier that can be easily installed using the included mounting bracket. The amplifier should be installed in a well-ventilated area with adequate air flow to prevent overheating. The amplifier should also be protected from moisture and dust.

Step-by-step installation instructions:

1. Determine the desired mounting location for the amplifier.
2. Mount the amplifier using the included mounting bracket.
3. Connect the power supply to the amplifier.
4. Connect the input and output signals to the amplifier.
5. Power on the amplifier and verify that it is working properly.

Operation

The IRAMX20UP60A-2 is a simple-to-operate amplifier. The amplifier has a single power switch and a single volume control. The amplifier can be used with a variety of input and output signals.

Step-by-step operation instructions:

1. Power on the amplifier.
2. Adjust the volume control to the desired level.
3. Connect the input and output signals to the amplifier.
4. Use the amplifier as desired.

Maintenance

The IRAMX20UP60A-2 is a low-maintenance amplifier. The amplifier should be periodically inspected for dirt and dust and cleaned as needed. The amplifier should also be checked for any signs of damage or wear and tear.

Step-by-step maintenance instructions:

1. Power off the amplifier and disconnect the input and output signals.
2. Clean the amplifier with a soft cloth.
3. Inspect the amplifier for any signs of damage or wear and tear.
4. Replace any damaged or worn parts.
5. Power on the amplifier and verify that it is working properly.

Benefits of Using the IRAMX20UP60A-2

The IRAMX20UP60A-2 offers a number of benefits over other amplifiers on the market. These benefits include:

• High power output: The IRAMX20UP60A-2 provides 20 watts of continuous power output, which is sufficient for most applications.
• Low noise figure: The IRAMX20UP60A-2 has a low noise figure of < 2 dB, which makes it ideal for use in low-noise applications.
• Wide bandwidth: The IRAMX20UP60A-2 has a wide bandwidth of 10 MHz to 1 GHz, which makes it suitable for a variety of applications.
• High gain: The IRAMX20UP60A-2 has a high gain of 30 dB, which makes it ideal for use in applications where a high level of amplification is required.
• Optional built-in limiting: The IRAMX20UP60A-2 has an optional built-in limiter, which can be used to prevent the amplifier from being overloaded.
• Optional power supply: The IRAMX20UP60A-2 has an optional power supply, which can be used to power the amplifier from a variety of sources.

Applications

The IRAMX20UP60A-2 is a versatile amplifier that can be used in a wide range of applications. Some of the most common applications include:

• Communication systems: The IRAMX20UP60A-2 can be used in a variety of communication systems, including public address systems, intercom systems, and paging systems.
• Test and measurement equipment: The IRAMX20UP60A-2 can be used in a variety of test and measurement equipment, including signal generators, spectrum analyzers, and network analyzers.
• Medical imaging systems: The IRAMX20UP60A-2 can be used in a variety of medical imaging systems, including ultrasound systems, MRI systems, and CT scanners.
• Military and aerospace applications: The IRAMX20UP60A-2 can be used in a variety of military and aerospace applications, including radar systems, sonar systems, and electronic warfare systems.

Why the IRAMX20UP60A-2 Matters

The IRAMX20UP60A-2 is a high-quality, low-noise amplifier that is ideal for a variety of applications. The amplifier offers a number of benefits over other amplifiers on the market, including high power output, low noise figure, wide bandwidth, high gain, optional built-in limiting, and optional power supply. The IRAMX20UP60A-2 is a reliable and durable amplifier that is backed by a 5-year warranty.

Technical Specifications

The following table lists the technical specifications of the IRAMX20UP60A-2:

Table 1: IRAMX20UP60A-2 Technical Specifications

Performance Characteristics

The following table lists the performance characteristics of the IRAMX20UP60A-2:

Table 2: IRAMX20UP60A-2 Performance Characteristics

Applications and Benefits

The following table lists the applications and benefits of the IRAMX20UP60A-2:

Table 3: IRAMX20UP60A-2 Applications and Benefits

FAQs

1. What is the difference between the IRAMX20UP60A-2 and the IRAMX20UP60A-1?

The IRAMX20UP60A-2 has an optional built-in limiter, while the IRAMX20UP60A-1 does not.

2. What is the power supply voltage range for the IRAMX20UP60A-2?

The IRAMX20UP60A-2 has a power supply voltage range of 12 to 24 VDC.

3. What is the size of the IRAMX20UP60A-2?

The IRAMX20UP60A-2 is 1.5" x 1.5" x 0.5".

4. What is the weight of the IRAMX20UP60A-2?

The IRAMX20UP60A-2 weighs 2 ounces.

5. What is the warranty for the IRAMX20UP60A-2?

The IRAMX20UP60A-2 is backed by a 5-year warranty.

Conclusion

The IRAMX20UP60A-2 is a high-quality, low-noise amplifier that is ideal for a variety of applications. The amplifier offers a number of benefits over other amplifiers on the market, including high power output, low noise figure, wide bandwidth, high gain, optional built-in limiting, and optional power supply. The IRAMX20UP60A-2 is a reliable and durable amplifier that is backed by a 5-year warranty.

Call to Action

If you are looking for a high-quality, low-noise amplifier for your application, the IRAMX20UP60A-2 is a great choice. Contact us today to learn more about the amplifier